INJECTION HOSE INSTALLATION IN LONDON
Specialist injection hose installation for warehouses and factories across London across London
Specialist injection hose installation services in London. We work on concrete structures requiring crack repair systems using resin delivery systems.
How We Work in London
At MPS Concrete Solutions, we provide comprehensive injection hose installation in London using resin delivery systems and polymer-based systems designed for concrete structures requiring crack repair systems.
Areas We Cover in London
And across Greater London
Why Choose MPS?
Injection Hose Installation Methods & Systems
We install specialist injection hose systems for crack repair, curtain grouting, and structural strengthening using resin injection technology.
Passive Injection Hoses
Pre-installed hose systems embedded in cracks that activate when water pressure occurs, automatically injecting resin to seal leaks without manual intervention in inaccessible areas.
Active Injection Systems
Pressure-controlled injection hose networks for systematic crack sealing, allowing staged resin injection into multiple cracks from a single pump system with precise flow control.
Curtain Grouting Hoses
Tube-à-manchette (TAM) systems for creating waterproof resin curtains in soil or rock, used for tunnel waterproofing, dam repairs, and foundation stabilisation applications.
Crack Stitching Integration
Combined crack stitching and injection hose systems that structurally reinforce cracks while simultaneously sealing them with epoxy or polyurethane resins.
Flexible Resin Delivery
Multi-port injection hose manifolds allowing sequential or simultaneous resin delivery to multiple crack locations, optimising injection efficiency in large-scale repairs.
Monitoring & Testing
Pressure monitoring systems integrated with injection hoses to verify complete resin penetration, detect flow resistance, and confirm structural bond quality during injection.
Injection Hose Installation Process
Crack Mapping & Planning
Cracks are mapped, depth assessed, and injection hose layout designed to ensure complete resin coverage. Hose spacing and port locations determined based on crack characteristics.
Hose Installation
Injection hoses are surface-mounted along crack lines or embedded into drilled channels, secured with quick-set adhesive, and connected to injection ports or manifolds.
Resin Injection
Low-viscosity epoxy or polyurethane resin is pressure-injected through hoses, flowing through valves or porous sections into cracks until complete saturation is achieved.
Curing & Removal
After resin cures (24-48 hours), surface-mounted hoses are cut flush, embedded hoses remain in place, and surfaces are finished to match existing concrete appearance.
Frequently Asked Questions
When is injection hose installation necessary?
Injection hoses are used for deep cracks, inaccessible locations, cracks requiring systematic multi-point injection, curtain grouting applications, or where passive systems that activate automatically when water pressure occurs are required. They're essential for complex structural crack repairs where standard surface injection may be insufficient.
What's the advantage of injection hoses over standard crack injection?
Injection hoses allow resin delivery deep into cracks from multiple points, ensuring complete penetration in thick sections. They enable systematic injection along entire crack lengths, work in inaccessible areas, and passive systems can seal future water ingress automatically without further intervention.
How much does injection hose installation cost?
Costs vary based on crack length, depth, accessibility, hose type (passive/active), and resin volumes required. Injection hose systems typically cost £800-£2,500 for residential crack repairs, with larger commercial projects priced per linear metre. The additional cost over standard injection is justified by superior penetration and reliability.
Can injection hoses seal cracks that are still moving?
Yes, when using flexible polyurethane resins through injection hoses, the system can accommodate minor crack movement while maintaining waterproof integrity. Passive injection hoses are particularly effective as they automatically inject resin when crack movement causes water pressure, creating self-healing characteristics.
Are injection hoses left in the structure permanently?
This depends on installation method. Surface-mounted hoses are typically removed after injection and cut flush. Embedded hoses in drilled channels or passive systems remain in place permanently, encapsulated in resin and invisible once surfaces are finished. Both approaches provide permanent structural crack sealing.
Standards, Credentials & Documented Work
What you can check before appointing us.
Standards that govern this work
- BS 8102:2022 — detailing of construction joints in Type B (structurally integral) protection
- BS EN 1504-5 — the injection resins and grouts used to seal the hose after the pour
Who does the work
MPS Concrete Solutions was founded in 2013 and works from Gamlingay, Cambridgeshire (SG19 3JW). Our operatives hold NVQs in resin and grout injection, CSCS, SSSTS and SMSTS cards, and PASMA and MEWP (3a/3b) training, and are confined-space trained.
- Constructionline Gold member; SSIP accredited
- UKAS-accredited certification to ISO 9001, ISO 14001 and ISO 45001
- Concrete Repair Association (CRA) member
- Sika-specified applicator
Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions. Last reviewed September 2026.
Our work in London
The Dumont, Albert Embankment, London Internal cementitious render to a PUDLO waterproof-concrete attenuation tank for St James Group, working in confined space; turned around in three days. Sterling Court, North London Podium deck and soffit remediation: breakout of defective concrete, re-levelling and a waterproofing system above occupied areas. Bromley South Central, London New expansion joint system and patch repairs to a multi-level car park, phased to keep it operational. Project George, Oxford Circus, London Basement cavity drain installation for LDD Construction at 100–140m² a day, finished in under five weeks against competitor quotes of eight or more. The Ridgeway, Mill Hill Waterproofing a long run of 20mm movement joints on a podium deck over a basement car park, under a 20-year PUDLO warranty. Canary Wharf, London Hydrophilic resin injection to stop active water ingress at the abutments of a bascule bridge beside the Jubilee Line exclusion zone.Other Services in London
We offer a complete range of concrete repair and waterproofing services across Greater London.
Industrial Concrete Repairs
Fix cracks, spalling & structural damage
Resin Injection & Crack Sealing
Stop water ingress & seal cracks
Penetration Sealing
Seal pipe & cable penetrations
Cavity Drain Installation
Control basement moisture
External Waterproofing
Protect below-ground structures
Membrane Installation
Waterproof barriers for all surfaces
Need Injection Hose Installation in London?
Expert injection hose installation services across Greater London. Fast, professional, durable.
