Newton Waterproofing Products
About Newton Waterproofing
Newton Waterproofing Systems is the UK's leading independent manufacturer and distributor of waterproofing solutions for new and existing structures. Specializing in cavity drain membrane (CDM) systems and basement tanking, Newton has pioneered maintainable waterproofing solutions that comply with British Standard 8102:2022.
Our Specialties
Cavity Drain Membrane (CDM) Type C waterproofing systems
Complete basement tanking and damp proofing solutions
Drainage pumps and control systems
BES 6001 certified sustainable membranes
Why Choose Newton Waterproofing: Newton operates the industry's first and only NSBC Membrane Recycling Service, demonstrating their commitment to sustainability while delivering Grade 3 habitable environments in below-grade spaces.
Newton Waterproofing Products
HydroTank 302 Injection Hose
HydroTank 302 is a specialized PVC injection hose system with micro-ports. It is installed in construction joints before concrete pouring and allows for the subsequent injection of resins (like acrylics or polyurethanes) to seal the joint.
HydroCoat 104 Super
HydroCoat 104 Super is a crystalline waterproofing formulation that is applied to the surface of concrete. It penetrates deeply into the capillaries and reacts with free lime to form insoluble crystals, blocking water passage.
HydroCoat Monoflex
HydroCoat Monoflex is a high-performance joint sealing system consisting of a flexible TPE tape bonded with a specialized epoxy adhesive. It is designed to bridge large movement joints and cracks.
Acrylic Injection Resins
Newton's acrylic injection resins are low-viscosity, water-based hydrophilic gels. They are designed to penetrate very fine cracks and capillaries, swelling to form an elastic seal.
HydroBond 403
HydroBond 403 is a high-performance, self-healing, composite sheet membrane. It consists of a hydrophilic polymer coating on a mesh carrier. It is pre-applied to formwork before concrete is poured, creating a mechanical bond with the wet concrete.
DampSafe 802-DPM
DampSafe 802-DPM is a robust, low-density polyethylene (LDPE) damp proof membrane. It is manufactured from 100% recycled materials and provides a barrier against ground moisture.
HydroBond 402
HydroBond 402 is a self-adhesive, composite sheet membrane for post-applied external waterproofing. It features a robust HDPE film and a pressure-sensitive adhesive layer.
HydroBond SA
HydroBond SA is a high-performance, self-adhesive bituminous waterproofing membrane. It is reinforced with a cross-laminated HDPE film for superior tear resistance and dimensional stability.
HydroCoat 1
HydroCoat 1 is a rapid-setting, tanking slurry/render system. It is a polymer-modified cementitious coating that can be applied in a single coat to provide a waterproof finish.
HydroCoat Tanking Slurry
HydroCoat Tanking Slurry is a cementitious waterproof coating containing crystallizing agents and polymers. It is applied as a slurry by brush or trowel to concrete and masonry.
Newton FlexJoint & Newton FlexJoint HD
Newton FlexJoint is a closed-cell polyethylene foam joint filler. FlexJoint HD is a high-density version. They are used as compressible fillers in expansion joints to support sealants.
TRADECC Injection Resin Ancillaries
A comprehensive range of tools and accessories required for resin injection. This includes steel and plastic packers, high-pressure pumps, and cleaning solvents.
Epoxy Top Coat
Epoxy Top Coat is a two-component, solvent-free, high-build epoxy floor coating. It provides a durable, glossy, chemical-resistant finish for industrial and commercial floors.
Titan-Pro Pump System
The Titan-Pro is a fully packaged sump and pump system designed for use with Newton's Cavity Drain Membrane (CDM) systems. It collects and discharges ground water to a safe drainage point.
FlexProof 106 System
FlexProof 106 is a single-component, fibre-reinforced liquid waterproofing compound. It is designed for detailing and sealing complex shapes, pipe penetrations, and joints.
CDM 508 Mesh Membrane
CDM 508 Mesh is an 8mm studded HDPE cavity drain membrane with a fused mesh face. It is designed to be applied to walls and allows for direct plastering, rendering, or dot-and-dab dry lining.
Newton Façade Cream
Newton Façade Cream is a silane/siloxane-based cream emulsion. It penetrates deeply into masonry to provide a water-repellent barrier without changing the surface appearance.
TRADECC Injection Resins
A range of high-performance polyurethane injection resins from TRADECC, distributed by Newton. These include foaming resins for water stopping and solid resins for structural consolidation.
