Planiseal 288
Planiseal 288 is a two-component, polymer-modified, cementitious waterproofing mortar. It cures to form a slightly flexible rigid membrane suitable for positive and negative side waterproofing on masonry and concrete.
Applications & Uses
- Waterproofing underground masonry and concrete structures - Lining water tanks and reservoirs (potable water approved in some regions) - Protecting concrete from water and mild chemical attack
Features & Benefits
- Excellent adhesion to prepared substrates - Permeable to water vapor - Can be applied by trowel or brush - Resists positive and negative hydrostatic pressure
Technical Specifications
- Mix Ratio
- Part A : Part B = 4 : 1
- Pot Life
- 60 minutes
- Adhesion
- > 1.0 MPa
- Water Impermeability
- Positive and Negative pressure
Frequently Asked Questions
How a Product Like This Gets Specified
Choosing a material is the last step, not the first. On every job the order is the same: establish the defect mechanism, decide which part of BS EN 1504 governs the remedy, then pick a product whose declared performance class satisfies it. Reaching for a product first is how repairs fail a second time.
- Diagnosis. Hammer survey for delamination, cover meter readings, carbonation depth to BS EN 14630, chloride sampling where salt is in play, and water path tracing where something is leaking.
- Standard. BS EN 1504-2 for surface protection and coatings, -3 for repair mortars (class R3 or R4 where the repair carries load), -5 for injection products, -7 for reinforcement protection, and BS 8102:2022 where the structure is below ground.
- Substrate preparation. BS EN 1504-10 governs this, and it decides more repairs than the product does — a sound, correctly profiled, correctly saturated substrate, with the micro-cracked layer left by percussive breakout removed.
- Conditions on the day. Substrate temperature, substrate moisture content and dew point all have to be inside the manufacturer's window before anything is mixed. This is why winter work takes longer, not why it costs more.
- Verification. Pull-off adhesion testing to BS EN 1542 on completed repairs, so the bond is a measured number rather than an assumption.
We are happy to say when a cheaper product does the same job, and when the product named in a specification is the wrong one for the defect in front of us. Background reading: our concrete repair cost guide, the concrete spalling repair guide, and the BS 8102:2022 compliance checklist for below-ground work.
Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions. Last reviewed October 2026.
Send photographs of the defect and we will tell you whether Planiseal 288 is the right answer — including when it is not. We can also send the technical datasheet and safety data sheet, or book a free site survey with a written diagnosis and a fixed, itemised quotation.
