Fosroc Products
About Fosroc
With over 80 years of British heritage, Fosroc has established itself as a global leader in specialized construction chemicals. Recently acquired by Saint-Gobain in 2025, Fosroc combines decades of expertise with expanded resources to deliver world-class solutions across commercial, industrial, residential, marine and infrastructure sectors.
Our Specialties
Complete range of waterproofing systems and protective coatings
Advanced concrete admixtures and repair materials
Industrial flooring and joint sealants
Grouts, anchors and cement additives
Why Choose Fosroc: Fosroc's iconic brands including Nitoproof, Proofex, and Supercast are trusted by construction professionals worldwide for extending the lifespan of structures beyond their original design.
Fosroc Products
Renderoc LA - Fosroc
Renderoc LA is a high-performance, free-flowing, low-alkali micro-concrete. It is shrinkage-compensated and designed for large-volume structural repairs where reinforcement congestion prevents manual compaction.
Nitoprime Zincrich Plus - Fosroc
Nitoprime Zincrich Plus is a single-component, zinc-rich epoxy primer. It provides active galvanic protection to steel reinforcement within concrete repairs, preventing corrosion recurrence.
Nitokit TH - Fosroc
Nitokit TH is a complete crack injection kit containing a two-part thixotropic epoxy resin. It is designed for gravity or low-pressure injection of wide cracks where a flowable resin might run out.
Renderoc Plug 1 - Fosroc
Renderoc Plug 1 is a rapid-setting, cement-based water-stopping mortar. It sets within approximately 1 minute to plug active water leaks in concrete and masonry.
Enhance Your Cementitious Repairs with Fosroc Renderoc Primer
Renderoc Primer is a polymer-modified cementitious slurry primer. It is designed to promote adhesion between the existing concrete substrate and fresh Renderoc repair mortars.
Fosroc Waterproofing Solutions for Construction Projects _ Fosroc
Fosroc offers a complete suite of waterproofing solutions, highlighted by Proofex Engage. Proofex Engage is a pre-applied membrane with a unique cell mesh that mechanically bonds to poured concrete, preventing water migration.
Proofex Waterproof Render - Fosroc
Proofex Waterproof Render is a polymer-modified, cement-based render system. It is applied to walls to provide a dense, waterproof barrier against positive and negative pressure.
Webertec Mulsibond – Crack Sealer & Floor Screed Consolidator
Note: Product name 'Webertec' suggests Weber, but labeled here as Fosroc (likely a data mix-up in source, referring to similar product Nitobond). Assuming description refers to a Fosroc equivalent acrylic emulsion bonding agent like Nitobond AR.
Nitomortar FC_ High-Quality Epoxy Fairing Coat for Concrete
Nitomortar FC is a two-component, thixotropic epoxy paste. It is used as a fairing coat to fill blowholes, surface imperfections, and provide a smooth, impermeable finish on concrete.
Nitoprime Zincrich - Fosroc
Nitoprime Zincrich is the standard zinc-rich epoxy primer for steel reinforcement protection. It creates a barrier and provides galvanic protection.
Flexcoat - Fosroc
Flexcoat is a two-component, flexible cementitious coating. It provides a protective, weather-resistant coating that can accommodate substrate movement and crack formation.
Expocrete EC - Fosroc
Expocrete EC is a three-component epoxy resin concrete. It is designed for repairs requiring high mechanical strength and chemical resistance, such as industrial floors and rail grouting.
Protectosil CIT
Protectosil CIT is a surface-applied, migrating corrosion inhibitor. It penetrates deep into the concrete to form a protective layer on the steel reinforcement, inhibiting corrosion even in high chloride environments.
Nitocote AP35
Nitocote AP35 is a single-component, acrylic polymer-based coating. It is designed as a primer and protective coating for steel reinforcement, offering a degree of flexibility.
Patchroc 250
Patchroc 250 is a fast-setting cementitious patch repair mortar. It is formulated for heavy-duty repairs to pavements and floors where downtime must be minimized.
Nitokit LV
Nitokit LV is a low-viscosity epoxy injection kit. It is designed for injecting fine cracks where high penetration is required to restore structural integrity.
Conbextra EP10
Conbextra EP10 is a high-performance, flowable epoxy grout. It is designed for grouting gaps from 0.25mm to 10mm, offering exceptional dynamic load resistance.
Renderoc HB30
Renderoc HB30 is a lightweight, high-build concrete repair mortar. It is polymer-modified and fiber-reinforced, designed for vertical and overhead repairs without formwork.
Patchroc GP
Patchroc GP is a general-purpose, fast-setting patch repair mortar. It is ideal for rapid reinstatement of concrete floors and pavements.
Renderoc FCR
Renderoc FCR is a fast-curing, cementitious fairing coat/repair mortar. It is designed for thin-layer applications to finish and smooth concrete surfaces.
Nitocote VF
Nitocote VF is a three-component, thixotropic epoxy resin compound. It acts as a filler and sealer for concrete surfaces, providing a chemical-resistant barrier.
Expocrete EUW
Expocrete EUW is a specialized epoxy concrete designed for underwater applications. It displaces water and bonds effectively to submerged substrates.
Nitofill TH
Nitofill TH is a thixotropic, two-part epoxy resin injection grout. Its non-slump nature makes it ideal for injecting open-ended cracks where low viscosity resins would flow out.
Nitofill WS60
Nitofill WS60 is a rapid-reacting polyurethane injection resin that foams upon contact with water. It is used to stop active water flow before permanent sealing.
Nitomortar S
Nitomortar S is a high-strength, abrasion-resistant epoxy mortar. It is designed for repairing concrete surfaces subjected to heavy traffic and mechanical impact.
Nitofill UR63
Nitofill UR63 is a flexible, two-part polyurethane injection resin. It is used for permanent sealing of cracks where movement is expected.
Nitomortar HB
Nitomortar HB is a high-build, lightweight epoxy mortar. It is formulated for overhead and vertical repairs where high strength and chemical resistance are required.
Epoxy Anchors / Epoxy Grouts
This category covers Fosroc's range of anchoring products (Lokfix) and grouts (Conbextra EP). These are high-strength resin systems for fixing steel into concrete.
webercem advanced repair concrete
Note: Product likely refers to 'Webercem' brand (Weber), listed here under Fosroc. Description describes a flowable Class R4 micro-concrete.
Renderoc DS
Renderoc DS is a dry-spray, polymer-modified cementitious mortar. It is designed for large-scale structural repairs using dry-spray equipment.
Paveroc
Paveroc is a high-performance, cementitious reinstatement mortar for large areas. It allows for long working times but rapid strength gain once placed.
Fosroc® Marine Jacket
Fosroc Marine Jacket is a galvanic corrosion protection system. It consists of a zinc mesh anode encased in a fiberglass jacket, filled with a specialized mortar, clamped around piles.
Nitocote Putty
Nitocote Putty is an acrylic-based surface filler/smoother. It is used to level minor imperfections and create a smooth surface prior to painting.
Conbextra EP10(M)
Conbextra EP10(M) is a moisture-tolerant version of the EP10 epoxy grout. It is designed for use where the substrate cannot be fully dried.
Nitofill LV
Nitofill LV is the standard low-viscosity epoxy resin system for structural injection of cracks.
Nitomortar PE
Nitomortar PE is a polyester resin-based repair mortar. It is known for its extremely rapid setting time, making it ideal for fast-track jointing and fixing.
